Lamotte WATER SAMPLER JT-1 1077 User Manual download pdf

WA TER SAM PLER

MODEL JT -1 • CODE 1077

IN TRO DUC TION

The LaMotte Water Sampler is designed to take a 1.0 liter sample in water

with a depth of 5 meters or more. It is attached to a calibrated line which

is used to measure the depth at which samples are obtained. The line is

marked at 0.5 meter and 1 meter increments. A horizontal triggering

device is activated by a brass messenger which is sent down the line to trip

the closing mechanism and release the two fitted plungers. These plungers

provide a positive seal and prevent the sample from mixing with

intermediate layers of water as the sample is brought to the surface. A lead

collar has been added to the water sampler to insure rapid descent and to

minimize drifting due to current movements. The materials which were

chosen to make the sampler were selected for their ability to prevent any

contamination of the sampled water. Attached to the sampling chamber is

a special drain outlet for removing sample aliquots. All components of the

LaMotte Water Sampler are made with non-corrosive materials.

Messenger

Trigger A

Plunger A

Plunger A Cable

Outlet

Trigger B

Plunger B

Plunger B Cable

Outlet

Retaining Cables

1 2

WA TER SAM PLER 1
LaMOTTE COMPANY 2

Summary of Contents

Page 1 - WA TER SAM PLER

WA TER SAM PLERMODEL JT -1 • CODE 1077IN TRO DUC TIONThe LaMotte Water Sampler is designed to take a 1.0 liter sample in water with a depth of 5 me

Page 2 - LaMOTTE COMPANY

METHOD FOR COL LECTING WA TER SAM PLES1. To set the trigger mechanisms, hold the sampler by the brass handlewith triggers in the “up” position. Pull t

Comments to this Manuals

No comments

Lamotte WATER SAMPLER JT-1 1077 User Manual

Browse online or download User Manual for Equipment Lamotte WATER SAMPLER JT-1 1077. LaMotte WATER SAMPLER JT-1 1077 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Lamotte WATER SAMPLER JT-1 1077