Lamotte SMART3 Colorimeter User Manual Page 67
- Page / 294
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
BATTERY
BATTERY/AC OPERATION
The SMART3 may be operated on battery power, using a USB wall adapter or
USB computer connection. If using the meter as a bench top unit, use the wall
adapter if possible to extend the battery life. The meter will remain on when the
USB adapter is used.
To charge the battery with the wall adapter, plug the smaller end of the USB
cable (USB mini B connector) into the meter and the larger end of the USB
cable (USB Type A connector) into the wall adapter. Plug the wall adapter into
an AC outlet. Reinsert the USB port plug after charging.
To charge the battery from a computer, plug the smaller end of the USB cable
(USB mini B connector) into the meter and the larger end of the USB cable (USB
Type A connector) into a USB port on a computer.
The battery icon will show no bars and fl ash when the unit fi rst turns on. Then
the indicator will indicate the battery status by showing 0, 1, 2, 3 or 4 bars.
It will take 5 hours to fully charge a low battery. The battery icon will fl ash when
the battery is charging. The battery icon will show four bars and stop fl ashing
when it is fully charged. The charging circuit will automatically switch to a fl oat
charge when the battery is fully charged. The charger may remain connected.
Some computers will NOT supply power to their USB ports during standby
operation. The wall adapter will charge the unit continuously.
The battery icon will show no bars and continuously fl ash if the battery is getting
low but the unit will still operate normally. A “Low Battery” message on the
status bar of the display will replace the time when the battery voltage is too
low for proper operation and accuracy may be degraded. A “Shutdown Low
Batt” message on the display will appear for a few seconds before the power is
switched off when the battery is too low to operate the unit.
To extend the battery life:
• Shut down the unit with the power switch when not taking measurements
or use the power save option to have the unit automatically turn off after 5
minutes.
• Store the unit in a cool dry place.
• Fully charge the battery before storing the unit for extended periods of time.
• Limit backlight use. The unit consumes 3X normal power with the backlight
on. Set the backlight time option to 10 seconds, or select “Button Control”
and keep the backlight off.
Battery replacement: The lithium ion battery used in this unit should last for
many years with normal use. When it no longer powers the unit long enough to
meet testing requirements it will need to be replaced. Lithium ion batteries that
are properly charged and stored do not usually lose all capacity; they just have
SMART3 Colorimeter 11.10 65
- CONTENTS 3
- GENERAL INFORMATION 5
- LIMITS OF LIABILITY 6
- WARRANTY 6
- REGISTER YOUR METER 6
- SPECIFICATIONS 7
- 6 SMART3 Colorimeter 11.10 8
- CONTENTS AND ACCESSORIES 9
- ACCESSORIES 9
- EPA COMPLIANCE 10
- CE COMPLIANCE 10
- IP67 CERTIFICATION 10
- CHEMICAL TESTING 11
- Sampling of Closed System 12
- FILTRATION 12
- SMART3 Colorimeter 11.10 11 13
- REAGENT BLANK 14
- METER CARE 14
- CALIBRATION 15
- CALIBRATION CURVES 15
- 14 SMART3 Colorimeter 11.10 16
- SMART3 Colorimeter 11.10 15 17
- STANDARD ADDITIONS 18
- MEASUREMENTS 19
- INTERFERENCES 20
- STRAY LIGHT INTERFERENCE 20
- OPERATION OF THE 21
- SMART3 COLORIMETER 21
- COMPONENTS 22
- GENERAL OPERATING PROCEDURES 23
- 22 SMART3 Colorimeter 11.10 24
- Result or 25
- LOOPING MENUS 26
- TESTING MENU 27
- TEST SEQUENCES 28
- GENERAL TESTING PROCEDURES 28
- 1.00 ppm 30
- SMART3 Colorimeter 11.10 29 31
- 0.28 ppm 32
- 0.30 ppm 33
- 32 SMART3 Colorimeter 11.10 34
- SMART3 Colorimeter 11.10 35 37
- EDITING MENU 38
- SMART3 Colorimeter 11.10 37 39
- Editing/Set Up 39
- ADDING OR DELETING A TEST 40
- ADDING A TEST 40
- DELETING A TEST 42
- SMART3 Colorimeter 11.10 41 43
- EDIT USER TESTS 44
- U V W X 46
- H I J K 46
- S T U V 47
- 2 3 4 5 47
- E P Q R 47
- O P Q R 47
- 46 SMART3 Colorimeter 11.10 48
- 0 1 2 3 50
- 1 1 2 3 50
- . – 0 1 51
- SMART3 Colorimeter 11.10 51 53
- 52 SMART3 Colorimeter 11.10 54
- – 1 2 3 55
- O 1 2 3 55
- . – 0 1 55
- SETTING THE CLOCK 59
- LOGGING DATA 60
- FACTORY SETUP 61
- SETTING POWER SAVE 61
- 60 SMART3 Colorimeter 11.10 62
- SETTING THE BACKLIGHT TIME 63
- SELECTING A LANGUAGE 64
- SMART3 Colorimeter 11.10 63 65
- COMPUTER CONNECTION 66
- BATTERY/AC OPERATION 67
- MAINTENANCE 68
- TROUBLESHOOTING 69
- TROUBLESHOOTING GUIDE 70
- 1910-TEST 71
- 02.13.12 71
- REAGENT SYSTEMS 73
- ALKALINITY–UDV 77
- ALUMINUM 79
- AMMONIA NITROGEN - LOW RANGE 81
- PROCEDURE - FRESH WATER 82
- PROCEDURE - SALT WATER 82
- AMMONIA NITROGEN - HIGH RANGE 84
- BENZOTRIAZOLE/TOLYLTRIAZOLE 89
- BENZOTRIAZOLE PROCEDURE 91
- TOLYLTRIAZOLE PROCEDURE 92
- BIGUANIDE 93
- BORATE - UDV 95
- PROCEDURE 100
- Test Procedures 101
- PROCEDURE A: 102
- BROMINE (NO CHLORINE) 102
- PROCEDURE B: 102
- PROCEDURE C: 103
- BROMINE - UDV 105
- PAN METHOD • CODE 4017-01 109
- CHLORIDE 111
- CHLORINE 113
- PROCEDURE–FREE CHLORINE 115
- PROCEDURE–TOTAL CHLORINE 115
- PROCEDURE–COMBINED CHLORINE 119
- CHLORINE, FREE - UDV 121
- CHLORINE, TOTAL - UDV 125
- CHLORINE DIOXIDE 129
- CHROMIUM, HEXAVALENT 131
- CHROMIUM - HEXAVALENT 133
- TRIVALENT & TOTAL 133
- HEXAVALENT CHROMIUM PROCEDURE 135
- TRIVALENT CHROMIUM PROCEDURE 136
- PAN METHOD · CODE 4851 137
- COD – LOW RANGE 139
- COD – STANDARD RANGE 143
- COD – HIGH RANGE 147
- PLATINUM COBALT METHOD 151
- NO REAGENTS REQUIRED 151
- COPPER – LOW RANGE 153
- CUPRIZONE METHOD • CODE 4023 155
- COPPER – UDV 159
- CODE 3660-01-SC 163
- CYANURIC ACID 167
- CYANURIC ACID – UDV 169
- DISSOLVED OXYGEN 173
- FLUORIDE 177
- HARDNESS, TOTAL – UDV 181
- HYDRAZINE 183
- HYDROGEN PEROXIDE – LOW RANGE 185
- DPD METHOD • CODE 4045-01 187
- HYDROGEN PEROXIDE – SHOCK 189
- IRON – UDV 195
- PAR METHOD · CODE 4031 201
- MANGANESE – LOW RANGE 203
- MANGANESE – HIGH RANGE 205
- TMK METHOD · CODE 4861 207
- PREPARATION OF *TMK INDICATOR 208
- MOLYBDENUM – HIGH RANGE 209
- NITRATE - UDV 215
- NITRATE-NITROGEN – LOW RANGE 219
- NITRITE-NITROGEN – LOW RANGE 223
- NITROGEN, TOTAL 225
- OXYGEN SCAVENGERS 229
- DEHA PROCEDURE 231
- CARBOHYDRAZIDE PROCEDURE 232
- ERYTHORBIC ACID PROCEDURE 233
- HYDROQUINONE PROCEDURE 234
- METHYLETHYLKETOXIME PROCEDURE 235
- DPD METHOD • CODE 4881 237
- PROCEDURE - OZONE ONLY 238
- INDIGO METHOD • CODE 3651-SC 241
- PROCEDURE–LOW RANGE 242
- PROCEDURE–HIGH RANGE 243
- PHOSPHATE – LOW RANGE 251
- PHOSPHATE – HIGH RANGE 255
- PHOSPHATE ppb 257
- PHOSPHORUS, TOTAL - LOW RANGE 261
- DIGESTION • CODE 4025-01 265
- POTASSIUM 269
- SILICA – LOW RANGE 271
- SILICA – HIGH RANGE 275
- SULFATE – HIGH RANGE 277
- SULFIDE – LOW RANGE 279
- SURFACTANTS 283
- CODE 3666-01-SC 285
- TURBIDITY 287
- ZINC – LOW RANGE 289
- APPENDIX 292
- Appendix 293
Related products and manuals for Equipment Lamotte SMART3 Colorimeter
Equipment Lamotte SMARTLink3 User Manual
(8 pages)
(8 pages)
Equipment Lamotte SMART 2 User Manual
(258 pages)
(258 pages)
Equipment Lamotte TDS 5 Meter User Manual
(12 pages)
(12 pages)
Equipment Lamotte 3590-03 User Manual
(8 pages)
(8 pages)
Equipment Lamotte STH Outfit User Manual
(24 pages)
(24 pages)
Equipment Lamotte AR-42 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 0.361 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals