Lamotte SMART3 Colorimeter User Manual Page 193

  • Download
  • Add to my manuals
  • Print
  • Page
    / 294
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 192
IRON
BIPYRIDYL METHOD • CODE 3648-SC
QUANTITY CONTENTS CODE
30 mL *Iron Reagent #1 *V-4450-G
5 g *Iron Reagent #2 Powder *V-4451-C
1 Pipet, 0.5 mL, plastic 0353
1 Spoon, 0.1 g, plastic 0699
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for these reagents
go to www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail,
phone or fax.
Most natural waters contain some iron. Its presence may vary from small traces
to very large amounts in water which is contaminated by acid mine wastes.
For domestic use, the concentration should not exceed 0.2 ppm and for some
industrial applications not even a trace of iron can be tolerated. There are many
means available for removing or reducing the iron content. Water softening resins
are effective for removing small amounts of iron and special ion exchange materials
are selective for iron removal. High concentrations of iron can be removed by such
chemical processes as oxidation and lime or lime-soda softening. Because of the
many means of removing or reducing the amount of iron in water, the particular
method employed will depend largely on the form of iron which is present and the
end use of the treated water.
APPLICATION: Drinking, surface and saline waters; domestic and
industrial wastes.
RANGE: 0.00–6.00 ppm Iron
MDL: 0.10 ppm
METHOD: Ferric iron is reduced to ferrous iron and subsequently
forms a colored complex with bipyridyl for a quantitative
measure of total iron.
SAMPLE HANDLING
& PRESERVATION:
The sample container should be cleaned with acid and
rinsed with deionized water. Addition of acid to adjust the
sample to pH 2–3 will prevent deposition of iron on the
container walls. Samples should be analyzed as soon as
possible.
INTERFERENCES: Strong oxidizing agents interfere, as well as copper and
cobalt in excess of 5.0 mg/L.
SMART3 Test Procedures 11.10 IRON, Bipyridyl
Test Procedures
Page view 192
1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 293 294

Comments to this Manuals

No comments